Transmission Re-Learn

Transmission Re-Learn Process 

 

*Step 1*

  1. 1/4 Pedal throttle 
  2. 0 - 70mph  
  3. Come to a safe stop 
  4. Put in park 
  5. Turn off engine & remove key 
  6. Open driver's door and then close 

 

*Step 2* 

  1. 1/2 Pedal throttle 
  2. 0 - 70mph 
  3. Come to a safe stop 
  4. Put in park 
  5. Turn off engine & remove key 
  6. Open driver's door then close 

 

*Step 3* 

  1. 3/4 Pedal throttle 
  2. 0 - 70mph 
  3. Come to a safe stop 
  4. Put in park 
  5. Turn off engine & remove key 
  6. Open driver's door, then close 

 

  • If at any time the trans feels off, repeat that step. Come to a stop, switch off & remove key, re-open & close door, and repeat step. 

 

  • Once complete, drive the truck easy for about 1 full tank of fuel. This will give the transmissions time to learn good habits. 

 

  • When re-training the transmission, ALWAYS follow posted speed limits. Do NOT attempt runs in adverse weather conditions such as snow, ice, rain, wind, or any other conditions that may affect your vehicle's traction or impair your visibility! 

  

Note: On any vehicle using 3” or larger lift blocks under the rear leaf pack, it is HIGHLY RECOMMENDED to install traction bars. With any added horsepower, failure to do so may result in harsh shifting and may cause premature transmission and/or driveline damage.